Thiết Bị Phát WiFi Không Dây 300Mbps 802.11N / B / G
0 Đánh Giá
Đã Bán 0
59
773.200 đ
Xem sản phẩm trên Shopee
Cài đặt Bigbuy360 ExtensionQuốc tế
thứ tư 04/08/2021 lúc 06:33 CH
MÔ TẢ SẢN PHẨM
For the details of the product can be seen in ya kak 's description, you can immediately make payments on the product you want.
★★
You can replace this WiFi repeater function as an Access Point or a regular router.
Design Portable
Package CONTENTS.
The stuff you get in the product box:
1 x KexTech Wireless-N WiFi Repeater 300Mbps - WL0189
1 x LAN Cable
Wifi portable for high speed repeater router booster signal, simple installlation and use, your connection will be more comfortable.
Specs:
● Power 802.11b: 17dBm ± 1.5 dBm
● 802.11G: 14dBm ± 1.5 dBm
● 802.11N: 14dBm ± 1.5 dBm
● 2X3Dbi antenna integrated antenna
● Security - bit WEP, AES, TKIP, WPA, WPA2, 802.1x, WPA-PSK, WPA2-PSK, MAC, WDS
Software:
● Rfc768 User Datagram Protocol (UDP) standard version
● - 152-bit WEP.
● Wpa-Psk / WPA2-PSK, WPA / WPA2
● Dns relay (router mode support)
● Pass-Through VPN (Router mode support)
● Static router (router mode support)
● Static IP address allocation (router mode support)
Security:
● Ip settings and MAC addresses bind to attack A (Router mode support)
● Filtering IP address (Router mode support)
● Screening name (Router mode support)
● Mac address filtering (router mode support)
● Traffic system statistics
Hardware system:
● Port 1 x RJ45 Jack
● Wps Reset button
● Led 1 x LAN, 1 x WLAN, 1 x Power, 1 x WPS
● Chipset RTL8196E
● 16Mbps flash
● 128Mbps sdram
● Dc5V / 1A Internal power supply
● Eu plug
● Power consumption 2.3W
● Voltage / frequency / current VAC 50 / 60Hz, 0.1a max,
System requirements:
● 110 ~ socket 230 volts.
● Wlan clients must support at least WPA encryption standards.
● Ipv4 / Address Resolution Protocol.
● The network name (SSID) of the WLAN access point must be set to "visible".
Environment
● Operational temperature: 0 degrees ~ 40 degrees
● Storage temperature: - 40 degrees ~ 70 degrees
● Relative humidity: 10% ~ 90% (Non condensation)
★★
Note: Please confirm and write an honest review when the product you ordered has reached its destination.
★★
You can replace this WiFi repeater function as an Access Point or a regular router.
Design Portable
Package CONTENTS.
The stuff you get in the product box:
1 x KexTech Wireless-N WiFi Repeater 300Mbps - WL0189
1 x LAN Cable
Wifi portable for high speed repeater router booster signal, simple installlation and use, your connection will be more comfortable.
Specs:
● Power 802.11b: 17dBm ± 1.5 dBm
● 802.11G: 14dBm ± 1.5 dBm
● 802.11N: 14dBm ± 1.5 dBm
● 2X3Dbi antenna integrated antenna
● Security - bit WEP, AES, TKIP, WPA, WPA2, 802.1x, WPA-PSK, WPA2-PSK, MAC, WDS
Software:
● Rfc768 User Datagram Protocol (UDP) standard version
● - 152-bit WEP.
● Wpa-Psk / WPA2-PSK, WPA / WPA2
● Dns relay (router mode support)
● Pass-Through VPN (Router mode support)
● Static router (router mode support)
● Static IP address allocation (router mode support)
Security:
● Ip settings and MAC addresses bind to attack A (Router mode support)
● Filtering IP address (Router mode support)
● Screening name (Router mode support)
● Mac address filtering (router mode support)
● Traffic system statistics
Hardware system:
● Port 1 x RJ45 Jack
● Wps Reset button
● Led 1 x LAN, 1 x WLAN, 1 x Power, 1 x WPS
● Chipset RTL8196E
● 16Mbps flash
● 128Mbps sdram
● Dc5V / 1A Internal power supply
● Eu plug
● Power consumption 2.3W
● Voltage / frequency / current VAC 50 / 60Hz, 0.1a max,
System requirements:
● 110 ~ socket 230 volts.
● Wlan clients must support at least WPA encryption standards.
● Ipv4 / Address Resolution Protocol.
● The network name (SSID) of the WLAN access point must be set to "visible".
Environment
● Operational temperature: 0 degrees ~ 40 degrees
● Storage temperature: - 40 degrees ~ 70 degrees
● Relative humidity: 10% ~ 90% (Non condensation)
★★
Note: Please confirm and write an honest review when the product you ordered has reached its destination.
