Thiết bị lặp sóng Wifi không dây 300Mbps 802.11N/B/G

~ ~ this device amplifies / captures / expands wifi network signal ~ ~

Wifi 802.11g is a wireless connection with maximum speed and jangkuan. Maximal speeds up to 300mb / s and also support the wlan network 2.4ghz.
You can replace this wifi repeater function as an access point or a regular router.

Design portable

It has a small, easy-to- carry shape so that it can be used anywhere you need a wifi signal.

Package contents.

The stuff you get in the product box:

1 x kextech wireless-n wifi repeater 300mbps - wl0189

1 x lan cable

1 x manual
Portable wifi repeater router high speed signal booster, Simple installlation and use, Your connection will be more comfortable.


Specs:
● Power 802.11b: 17dbm ± 1.5 dbm
● 802.11g: 14dbm ± 1.5 dbm
● 802.11n: 14dbm ± 1.5 dbm
● Sensitivity 802.11b: - 83dbm / 802.11g: - 70dbm / 802.11n: - 68dbm
● 2x3dbi antenna integrated antenna
● Distance outdoors 300m, indoor 100m (according to actual environmental change)
● Security 64 / 128-bit wep, aes, tkip, wpa, wpa2, 802.1x, wpa-psk, wpa2-psk, mac, wds

Software:
● Rfc768 user datagram protocol (udp) standard version
● 64 / 128 / 152-bit wep
● Wpa-psk / wpa2-psk, wpa / wpa2
● Bandwidth ip control function (router mode support)
● Dns relay (router mode support)
● Pass-through vpn (router mode support)
● Static router (router mode support)
● Dhcp server (router mode support)
● Dhcp set list of servers (router mode support)
● Static ip address allocation (router mode support)

Security:
● Ip settings and mac addresses bind to arp attacks (router mode support)
● Filtering ip address (router mode support)
● Screening name (router mode support)
● Mac address filtering (router mode support)
● Traffic system statistics

Hardware system:
● Port 1 x rj45 jack
● Wps reset button
● Led 1 x lan, 1 x wlan, 1 x power, 1 x wps
● Chipset rtl8196e
● 16mbps flash
● 128mbps sdram
● Dc5v / 1a internal power supply
● Eu plug
● Power consumption 2.3w
● Voltage / frequency / current 100-240 vac 50 / 60hz, 0.1a max.

System requirements:
● Wlan access / client lines correspond to ieee 802.11n / g / b.
● 110 ~ socket 230 volts.
● Wlan clients must support at least wpa encryption standards.
● Wlan access line and wlan client with automatic ip address (dhcp) determination.
● Ipv4 / address resolution protocol.
● The network name (ssid) of the wlan access point must be set to "visible".

Environment
● Operational temperature: 0 degrees ~ 40 degrees
● Storage temperature: - 40 degrees ~ 70 degrees
● Relative humidity: 10% ~ 90% (non condensation)

Note: Please check if wifi-repeater matches factory default settings after you cannot download 192,168.1.1 if you ma