Thiết Bị Kiểm Tra Dây Cáp Tự Động Rj45 Rj11 Có Đèn Led
0 Đánh Giá
Đã Bán 0
92
102.000 đ
Xem sản phẩm trên Shopee
Cài đặt Bigbuy360 ExtensionQuốc tế
thứ sáu 30/04/2021 lúc 12:25 SA
MÔ TẢ SẢN PHẨM
Description:
100% brand new and high quality
Compact size and lightweight, easy for carry.
Eco-friendly shell, anti-aging, dual layer PCB circuit board, stable performance.
Simple design, auto scan, quick test with LED indicator.
Specifications:
Size: about 130*65*28mm
Weight: about 160g
Mode: auto mode, manual mode
Battery: 1*9V battery (not included)
Package included:
1*cable tester
Testing Method:
1. Test the twisted pair wires (1, 2, 3, 4, 5, 6, 7, 8, and G wires) one by one (pair),
and can distinguish which wire is right or wrong, short circuit and open circuit.
2. Can test USBA to A, USBA to B, RJ45, RJ11.
3. Turn on the power and the POWER red light will be on. Turn the switch to AUTO for the automatic test mode.
The AUTO green light will be flashing. Insert the network cable plugs into the main tester and the remote tester.
The host indicator lights will flash from 1 to G one by one. Toggle the switch to TEST, and the test restarts from 1 light.
Enter the manual jog cycle, press "TEST" to step one light, and so on.
Note:
1. Due to the light and screen difference, the item's color may be slightly different from the pictures.
2. Please allow slight deviation for the measurement data and make sure you do not mind before ordering.
High quality store for you!
#Cable #tester #network #Ethernet #LAN #USB #automatic #shutdown #auto #scan #mode #with #LED #indicator
100% brand new and high quality
Compact size and lightweight, easy for carry.
Eco-friendly shell, anti-aging, dual layer PCB circuit board, stable performance.
Simple design, auto scan, quick test with LED indicator.
Specifications:
Size: about 130*65*28mm
Weight: about 160g
Mode: auto mode, manual mode
Battery: 1*9V battery (not included)
Package included:
1*cable tester
Testing Method:
1. Test the twisted pair wires (1, 2, 3, 4, 5, 6, 7, 8, and G wires) one by one (pair),
and can distinguish which wire is right or wrong, short circuit and open circuit.
2. Can test USBA to A, USBA to B, RJ45, RJ11.
3. Turn on the power and the POWER red light will be on. Turn the switch to AUTO for the automatic test mode.
The AUTO green light will be flashing. Insert the network cable plugs into the main tester and the remote tester.
The host indicator lights will flash from 1 to G one by one. Toggle the switch to TEST, and the test restarts from 1 light.
Enter the manual jog cycle, press "TEST" to step one light, and so on.
Note:
1. Due to the light and screen difference, the item's color may be slightly different from the pictures.
2. Please allow slight deviation for the measurement data and make sure you do not mind before ordering.
High quality store for you!
#Cable #tester #network #Ethernet #LAN #USB #automatic #shutdown #auto #scan #mode #with #LED #indicator
