Thẻ Chuyển Đổi Nvme Pcie X4 X2 M.2 Ngff Ssd Sang Pcie X1 Sang M.2
0 Đánh Giá
1 Đã Bán
65
38.900 đ
Xem sản phẩm trên ShopeeQuốc tế
thứ sáu 02/07/2021 lúc 09:15 CH
Welcome to my shop, wish you have a happy day!!!
[shengfeia]NVMe PCIe x4 x2 M.2 NGFF SSD to PCIe x1 adapter card PCIe x1 to M.2 card
Description:
Size: length * width * height=97mm*22mm*5mm
note:
-If your motherboard chipset is below 9 series, do not use PCIe x4 hard drives such as pm951, sm951, pm950, XP941, etc.! AMD chipset motherboards are not recommended to buy! It's not that your motherboard has PCIE interface to use PCIE interface solid state drives, the key depends on whether your motherboard BIOS can support PCIE interface solid state drives! Under normal circumstances, chipsets below the 9 series certainly cannot support PCIE interface solid-state hard drive startup!
-Please make sure to insert the adapter card correctly into the PCIe interface of your motherboard, instead of inserting it into the PCI interface. Incorrect insertion may burn the adapter card and the motherboard! If there are burnt marks on the gold finger of the board, we will not return or exchange it. This must be caused by the wrong position!
-The original win 10 installation disk must be used to install the system. Win7 system and PE system do not support NVE protocol solid state drives because they do not have NVME drivers. The boot cannot be detected in the BIOS, but you can see the hard drive by pressing the boot menu selection key (for example, press F3 for Asus, F12 for Gigabyte, F11 for ASRock, etc., depending on your motherboard and manual). It means it's okay, and the system is done step by step.
[shengfeia]NVMe PCIe x4 x2 M.2 NGFF SSD to PCIe x1 adapter card PCIe x1 to M.2 card
Description:
Size: length * width * height=97mm*22mm*5mm
note:
-If your motherboard chipset is below 9 series, do not use PCIe x4 hard drives such as pm951, sm951, pm950, XP941, etc.! AMD chipset motherboards are not recommended to buy! It's not that your motherboard has PCIE interface to use PCIE interface solid state drives, the key depends on whether your motherboard BIOS can support PCIE interface solid state drives! Under normal circumstances, chipsets below the 9 series certainly cannot support PCIE interface solid-state hard drive startup!
-Please make sure to insert the adapter card correctly into the PCIe interface of your motherboard, instead of inserting it into the PCI interface. Incorrect insertion may burn the adapter card and the motherboard! If there are burnt marks on the gold finger of the board, we will not return or exchange it. This must be caused by the wrong position!
-The original win 10 installation disk must be used to install the system. Win7 system and PE system do not support NVE protocol solid state drives because they do not have NVME drivers. The boot cannot be detected in the BIOS, but you can see the hard drive by pressing the boot menu selection key (for example, press F3 for Asus, F12 for Gigabyte, F11 for ASRock, etc., depending on your motherboard and manual). It means it's okay, and the system is done step by step.