Tấm Silicon Tản Nhiệt 100x100mm Cho Cpu Máy Tính
1 Đánh Giá
Đã Bán 1
74
12.600 đ
Xem sản phẩm trên Shopee
Cài đặt Bigbuy360 ExtensionQuốc tế
thứ bảy 29/05/2021 lúc 03:39 CH
MÔ TẢ SẢN PHẨM
📣Working time: Monday-Friday, 9 am-285 pm📣
100x100mm 0.5mm Silicone Thermal Pad Sheet Computer CPU Graphics Chip Heat Sink
0.5mm Thermal Pad Sheet Heat Sink for Computer CPU Graphics Chip 100x100mm
Specifications:
Size: 100 x 100mm/3.94x 3.94in
Weight: 50g
Features:
Super soft, alittle sticky, good thermal conductivity, easy to cut, feels like plasticine,but has a certain degree of plasticity, super insulation, there is a sense ofcool put on the arm!
Application: affixed to the graphics card, video memory, Bridge chip, ICcontroller, power crystal, electrical and electronic products control board,TFT-LCD, switching power supply, LED lamps, etc.
How to use:
1, clear dust on the radiator and fan, clear the old thermal products;
2, make sure the chip and the radiator can be directly contacted;
3, determine the contact location of the chip and the radiator on the radiator;
4, peel off the release paper;
5, thermal sheet pasted at the location determined in step 3 (the bottom of theradiator is better than the surface of the chip);
6, press the thermal sheet for several times, especially the edge part, to makeit close to the radiator surface;
7, wait for about 2 minutes, carefully peel off the other side of the releasepaper from the thermal sheet, that is OK.
Included:
1 x Thermal Sheet
100x100mm 0.5mm Silicone Thermal Pad Sheet Computer CPU Graphics Chip Heat Sink
0.5mm Thermal Pad Sheet Heat Sink for Computer CPU Graphics Chip 100x100mm
Specifications:
Size: 100 x 100mm/3.94x 3.94in
Weight: 50g
Features:
Super soft, alittle sticky, good thermal conductivity, easy to cut, feels like plasticine,but has a certain degree of plasticity, super insulation, there is a sense ofcool put on the arm!
Application: affixed to the graphics card, video memory, Bridge chip, ICcontroller, power crystal, electrical and electronic products control board,TFT-LCD, switching power supply, LED lamps, etc.
How to use:
1, clear dust on the radiator and fan, clear the old thermal products;
2, make sure the chip and the radiator can be directly contacted;
3, determine the contact location of the chip and the radiator on the radiator;
4, peel off the release paper;
5, thermal sheet pasted at the location determined in step 3 (the bottom of theradiator is better than the surface of the chip);
6, press the thermal sheet for several times, especially the edge part, to makeit close to the radiator surface;
7, wait for about 2 minutes, carefully peel off the other side of the releasepaper from the thermal sheet, that is OK.
Included:
1 x Thermal Sheet
