Phụ Tùng Máy In 3d Cr-10 / Cr-10S / S4 S5
0 Đánh Giá
Đã Bán 0
106
566.000 đ
Xem sản phẩm trên Shopee
Cài đặt Bigbuy360 ExtensionQuận 7, Quốc tế
chủ nhật 23/05/2021 lúc 04:52 CH
MÔ TẢ SẢN PHẨM
Name: Assembled MK8 extrusion head kit (CR10 series hot end -12V24V) with hood fan and aviation interface
Suitable for cr10/10s/s4/s5
Operating temperature range: -40~ + 260°C (-40~ + 500°F)
Product weight: 270g
Precautions:
1,The CR-10 hot end can be used with different sizes of MK8 nozzles: 0.2 mm 0.3 mm 0.4 mm 0.5 mm 0.6 mm 0.8 mm 1.0 mm nozzle.
2,MK8 extruder hot end kit, white wire is temperature thermistor, red wire is heating tube 12V 40W, nozzle tip, aluminum heating block, straight throat, insulation cotton, straight through pneumatic joint, 4010 cooling fan, 4010 turbo fan, aviation Connector.
Pipe length: 30mm
Aluminum block size: approx. 20 x 20 x 10 mm
Thermistor and heater cable length: 1M
Nozzle size: 0.4/1.75
Material: aluminum + stainless steel + brass
colour:black
Package Contents:
1 * MK8 Extruder Hot End KitOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Suitable for cr10/10s/s4/s5
Operating temperature range: -40~ + 260°C (-40~ + 500°F)
Product weight: 270g
Precautions:
1,The CR-10 hot end can be used with different sizes of MK8 nozzles: 0.2 mm 0.3 mm 0.4 mm 0.5 mm 0.6 mm 0.8 mm 1.0 mm nozzle.
2,MK8 extruder hot end kit, white wire is temperature thermistor, red wire is heating tube 12V 40W, nozzle tip, aluminum heating block, straight throat, insulation cotton, straight through pneumatic joint, 4010 cooling fan, 4010 turbo fan, aviation Connector.
Pipe length: 30mm
Aluminum block size: approx. 20 x 20 x 10 mm
Thermistor and heater cable length: 1M
Nozzle size: 0.4/1.75
Material: aluminum + stainless steel + brass
colour:black
Package Contents:
1 * MK8 Extruder Hot End KitOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
