Người dùng đang quan tâm đến 🔥...

Phụ Kiện Vòi Phun Bằng Thép Titan Mk8 0.4mm Cho Máy In 3d

5.0
1 Đánh Giá
Đã Bán 1
95
631.284 đ

Quốc tế

chủ nhật 11/07/2021 lúc 05:45 SA

LỊCH SỬ GIÁ SẢN PHẨM

Đang tải lịch sử giá...

MÔ TẢ SẢN PHẨM

When installing the nozzle, a torque wrench is required.The maximum torque the nozzle can withstand is 5 Nm.Exceeding this torque can damage the titanium steel inlay.If there is no torque wrench, it doesn't matter.Do not use too much force During the installation process, try to control the strength.
Model: MK8 high temperature resistant titanium steel ruby nozzle 0.4mm
Temperature resistance: 2000 degrees Celsius
Applicable models: CR-10, Ender-3, Anet8
Features: strong acid resistance, strong alkali resistance, no discoloration, no deformation, hard, bright
Synthetic gemstone parameters: (The following are only gem parameters)
The main chemical composition of the material: aluminum oxide (AL2O3).
Main physical and chemical properties:
Appearance: red crystal, no special smell
Purity: greater than 99.9%
Density: 3.9--4. 10g/cm3
Melting point: 2050C+/-50C4
Hardness: Mohs 9
Tensile strength: 0.18Gpa, compressive strength: 1.9Gpa
Coefficient of friction: 0.1 (dry friction coefficient with steel).
Anti-corrosion acidity: acid and alkali resistance at room temperature, not resistant to hydrofluoric acid at 300 Celsius.
Anti-oxidation and durable.
colour:Silver
Material:metal
size:0.4mm
Package Contents:
1*MK8 titanium steel ruby 0.4mmOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
electronicsmarket.vn, Cửa hàng trực tuyến | BigBuy360 - bigbuy360.vn

electronicsmarket.vn

Tham gia: 23-04-2021

Cùng người đăng

Top Sản Phẩm Bán Chạy

Máy In

Sản phẩm liên quan

Sản phẩm liên quan