Phụ Kiện 9.2 Inch X 9.2 Inch Cho Máy In 3m Label 235x235mm
0 Đánh Giá
Đã Bán 0
83
148.000 đ
Xem sản phẩm trên Shopee
Cài đặt Bigbuy360 ExtensionQuốc tế
chủ nhật 23/05/2021 lúc 05:10 CH
MÔ TẢ SẢN PHẨM
Item Type:Glass Plate
el Number:Carbon Silicon Crystal Build Hotbed Platform
2018 Upgrade 3D Printer Heatbed Platform: can install on a heated bed and glass platform, work well for Ender 2/ 3 etc.
2 in 1 Build Sheet: the A plate is flexible and magnetic, it is easy to move away from build platform and take away printed els, B plate with 3M adhesive, stick on the build surface.
Please Kindly Note: the plate is magnetic, the temperature (recommended from 50 to 80 degrees centigrade) should not exceed 80 degrees. so It is not suitable for ABS . if set heated beyond 80 degree, it 's magnetism will be weaker.
Reuse, easy remove;
Separation type bending to take the el. It's more convenient.
No need the beauty of paper and scraper to assist the el.
Print not warped edge. No glue is needed.
Can be printed on cold bed.
Please kindly note:
Please level the build plate well before printing.
Please do not let heated nozzle touch the A plate directly !
colour:black
Material:plastic
Size: 235x235mm/ 9.2x9.2 inch
Package Contents:
1 * Magnetic stickerOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
el Number:Carbon Silicon Crystal Build Hotbed Platform
2018 Upgrade 3D Printer Heatbed Platform: can install on a heated bed and glass platform, work well for Ender 2/ 3 etc.
2 in 1 Build Sheet: the A plate is flexible and magnetic, it is easy to move away from build platform and take away printed els, B plate with 3M adhesive, stick on the build surface.
Please Kindly Note: the plate is magnetic, the temperature (recommended from 50 to 80 degrees centigrade) should not exceed 80 degrees. so It is not suitable for ABS . if set heated beyond 80 degree, it 's magnetism will be weaker.
Reuse, easy remove;
Separation type bending to take the el. It's more convenient.
No need the beauty of paper and scraper to assist the el.
Print not warped edge. No glue is needed.
Can be printed on cold bed.
Please kindly note:
Please level the build plate well before printing.
Please do not let heated nozzle touch the A plate directly !
colour:black
Material:plastic
Size: 235x235mm/ 9.2x9.2 inch
Package Contents:
1 * Magnetic stickerOnly the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
