Đầu Phun Mk10 Cho Máy In Cr-10 Cr-10S S4 S5 3d 1.75mm 0.4mm
0 Đánh Giá
Đã Bán 0
79
353.000 đ
Xem sản phẩm trên Shopee
Cài đặt Bigbuy360 ExtensionQuốc tế
chủ nhật 23/05/2021 lúc 05:02 CH
MÔ TẢ SẢN PHẨM
set2: 1x Creality 3D-Extruder Upgrade Kit + 1x 1M PTFE PTFE Bowden Tube(2.0mm ID/4.0mm OD) & 1x Aluminum block + 1x Heating tube (heating tube 1 m long, 12V /24V 40W) + 1x 1.75MM 0.4MM Brass Nozzle + 1x M6 x 30mm Throat pipe (built-in PTFE) + 1x Thermistor + Brass sleeve (1 meter long)
This is 3D Printer Part for CR-10 CR-10S S4 S5 3D Printer. Tip of the nozzle, aluminum heating block, Throat pipe (built-in PTFE) MK8 Extruder Hot End kit, white wire was temperature thermistor, red wire was heating tube 12V/24V 40W
Easy to install-unbolt the old original plastic extruder and screw in the new metal extruder,then it is ready to print.Suitable for 1.75mm filament 3D printer MK8 bowden extruder frame
Application-MK8 extruder drive feed kit,it can replace acrylic parts of CR-10 Series,CR-10 S4,CR-10 S5,CR-10 Mini,CR-10S,CR-10 Plus printer. Stable and durable-the MK8 extruder kit made of aluminum alloy material,more stable and durable than the original plastic one while working
Advantages-the metal extruder have stronger pressure to pushing the filament into printer nozzle,improve the printer's performance.You can adjust the extruder gear pressure by the adjustable bolt on your demand. Warm note-there are many small parts in the package,for safety,please keep away from your child
Installation type: external thread connection
Scope of application: 3D printer
Nozzle size: 0.4mm
Throat pipe length: 30mm
Aluminum block size: 20 mm x 20 mm x 10 mm
Operating temperature range: -40 ~ +260 Celsius (-40 ~ +500 Fahrenheit)
Thermistor and heater cable length: 1M
100% brand new and high quality.
color:red/dark red + gold
Material:aluminum alloy/Aluminum alloy + plastic + brass
Package contents:
1x Creality 3D-Extruder Upgrade Kit
1x 1M PTFE PTFE Bowden Tube(2.0mm ID/4.0mm OD)
1x Aluminum block
1x Heating tube (heating tube 1 m long, 12V /24V 40W)
1x 1.75MM 0.4MM Brass Nozzle
1x M6 x 30mm Throat pipe (built-in PTFE)
1x Thermistor + Brass sleeve (1 meter long)
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
This is 3D Printer Part for CR-10 CR-10S S4 S5 3D Printer. Tip of the nozzle, aluminum heating block, Throat pipe (built-in PTFE) MK8 Extruder Hot End kit, white wire was temperature thermistor, red wire was heating tube 12V/24V 40W
Easy to install-unbolt the old original plastic extruder and screw in the new metal extruder,then it is ready to print.Suitable for 1.75mm filament 3D printer MK8 bowden extruder frame
Application-MK8 extruder drive feed kit,it can replace acrylic parts of CR-10 Series,CR-10 S4,CR-10 S5,CR-10 Mini,CR-10S,CR-10 Plus printer. Stable and durable-the MK8 extruder kit made of aluminum alloy material,more stable and durable than the original plastic one while working
Advantages-the metal extruder have stronger pressure to pushing the filament into printer nozzle,improve the printer's performance.You can adjust the extruder gear pressure by the adjustable bolt on your demand. Warm note-there are many small parts in the package,for safety,please keep away from your child
Installation type: external thread connection
Scope of application: 3D printer
Nozzle size: 0.4mm
Throat pipe length: 30mm
Aluminum block size: 20 mm x 20 mm x 10 mm
Operating temperature range: -40 ~ +260 Celsius (-40 ~ +500 Fahrenheit)
Thermistor and heater cable length: 1M
100% brand new and high quality.
color:red/dark red + gold
Material:aluminum alloy/Aluminum alloy + plastic + brass
Package contents:
1x Creality 3D-Extruder Upgrade Kit
1x 1M PTFE PTFE Bowden Tube(2.0mm ID/4.0mm OD)
1x Aluminum block
1x Heating tube (heating tube 1 m long, 12V /24V 40W)
1x 1.75MM 0.4MM Brass Nozzle
1x M6 x 30mm Throat pipe (built-in PTFE)
1x Thermistor + Brass sleeve (1 meter long)
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
