Đầu đốt 12/24V 50W nhiệt độ cao dành cho máy in 3D
2 Đánh Giá
Đã Bán 4
86
50.000 đ
Mua ngay trên Shopee
Cài đặt Bigbuy360 ExtensionQuốc tế
chủ nhật 23/05/2021 lúc 05:42 CH
SO SÁNH GIÁ
MÔ TẢ SẢN PHẨM
Details:
* This heating tube is an essential accessory for 3D Printer.
* 100% Brand new and high quality.
* Types: 12V 1m, 12V 2m, 24V 1m, 24V 2m(optional)
* Voltage: 12/24V
* Power: 50W
* Heating head dimension: 6*20mm(approx)
* Heating head material: 304 stainless steel
* Cable length: approx. 2m / 1m
* Line thickness: 0.5 flat
* Heating temperature: max 350 degrees
* Color: As picture shown
* Weight:30g(1M), 41g(2M)
Warm Tips:
1. The effective heating part of the single end heating tube must be dried.
2. The electric joint of the single end heating pipe should be placed outside the insulation layer and heating room.
3. The operating voltage should not exceed 10% of its rated value, and the outer shell should be effectively grounded.
4. Electric heating element working environment, the temperature is not more than 95 degrees, non explosive, corrosive gas.
5. The electric heating element should be stored in the dry place, and it should not be dampened.
Package contents:
1* Heating Tube For 3D Printer
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness
* This heating tube is an essential accessory for 3D Printer.
* 100% Brand new and high quality.
* Types: 12V 1m, 12V 2m, 24V 1m, 24V 2m(optional)
* Voltage: 12/24V
* Power: 50W
* Heating head dimension: 6*20mm(approx)
* Heating head material: 304 stainless steel
* Cable length: approx. 2m / 1m
* Line thickness: 0.5 flat
* Heating temperature: max 350 degrees
* Color: As picture shown
* Weight:30g(1M), 41g(2M)
Warm Tips:
1. The effective heating part of the single end heating tube must be dried.
2. The electric joint of the single end heating pipe should be placed outside the insulation layer and heating room.
3. The operating voltage should not exceed 10% of its rated value, and the outer shell should be effectively grounded.
4. Electric heating element working environment, the temperature is not more than 95 degrees, non explosive, corrosive gas.
5. The electric heating element should be stored in the dry place, and it should not be dampened.
Package contents:
1* Heating Tube For 3D Printer
Note: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness