Đầu Chuyển Đổi 3 Trong 1 Lightning Sang Rj45 Usb Và Lightning Lan 100mbps Ethernet Rj45 Cho Camera Iphone Ipad
0 Đánh Giá
Đã Bán 0
63
452.900₫
Mua ngay trên Shopee
Cài đặt Bigbuy360 ExtensionQuốc tế
Cập nhật: thứ năm 03/09/2026 lúc 01:18 CH
LỊCH SỬ GIÁ SẢN PHẨM
Đang tải lịch sử giá...
SO SÁNH GIÁ
MÔ TẢ SẢN PHẨM
iPhone Lightning to 10/100Mbps RJ45 Ethernet LAN Wired Network Adapter & Lightning to Wired Network Cable Connector & Lightning to USB Camera Adapter Multifuction Charging and Data Sync adapter for iPhone/iPad
Specification
Type : Lightning to RJ45/USB/ Lightning
Size : 53 * 32 * 10mm
Application: : Computer
Application2: : Projector
Application3: : Camera
High Speed: 10Mbps/100Mbps
System Demand: iOS 10.x ( iOS 10.0.1- iOS 10.3.3 )+ iOS 11 x (11.0.1-11.0.3) Lightning to RJ45 Ethernet LAN Network Adapter for iPhone/iPad.
It's convenient to go-anywhere with simply connecting it to an available iPhone/iPad and LAN network, easy to carry and use.Also with a adapter for lighting to USB camera reader and charging port.
How to Use?
-- 1. Turn off Wi-Fi on your iPad or iPhone.
-- 2. Insert your router-connected Ethernet cable into Ethernet port of our adapter, and connect the lightning end into your iPad or iPhone.
-- 3. Go to"Setting" in your iPad or iPhone and the Ethernet settings will show up on your screen.
-- 4. Click the "Ethernet" to obtain an IP address.
-- 5. Open Safari and check if the connection is working.
Compatibility:
-- iPhone Models: iPhone X/iPhone 8 Plus/8/7 Plus/7/6s Plus/6s/6Plus/6/SE/5s/5
--iPad Models: iPad Pro/ iPad Air 2/ iPad Air/ iPad mini4/ iPad mini3/ iPad mini2
Friendly Note:
-Please make sure your router-connected Ethernet cable is connected to internet.
-This adapter can't dial-up internet itself,need your router device provide a IP by DHCP service.
-This adapter cannot work with the devices whose system is below iOS10.0. Please upgrade your system to iOS 10.0 or up,before using it.
Specification
Type : Lightning to RJ45/USB/ Lightning
Size : 53 * 32 * 10mm
Application: : Computer
Application2: : Projector
Application3: : Camera
High Speed: 10Mbps/100Mbps
System Demand: iOS 10.x ( iOS 10.0.1- iOS 10.3.3 )+ iOS 11 x (11.0.1-11.0.3) Lightning to RJ45 Ethernet LAN Network Adapter for iPhone/iPad.
It's convenient to go-anywhere with simply connecting it to an available iPhone/iPad and LAN network, easy to carry and use.Also with a adapter for lighting to USB camera reader and charging port.
How to Use?
-- 1. Turn off Wi-Fi on your iPad or iPhone.
-- 2. Insert your router-connected Ethernet cable into Ethernet port of our adapter, and connect the lightning end into your iPad or iPhone.
-- 3. Go to"Setting" in your iPad or iPhone and the Ethernet settings will show up on your screen.
-- 4. Click the "Ethernet" to obtain an IP address.
-- 5. Open Safari and check if the connection is working.
Compatibility:
-- iPhone Models: iPhone X/iPhone 8 Plus/8/7 Plus/7/6s Plus/6s/6Plus/6/SE/5s/5
--iPad Models: iPad Pro/ iPad Air 2/ iPad Air/ iPad mini4/ iPad mini3/ iPad mini2
Friendly Note:
-Please make sure your router-connected Ethernet cable is connected to internet.
-This adapter can't dial-up internet itself,need your router device provide a IP by DHCP service.
-This adapter cannot work with the devices whose system is below iOS10.0. Please upgrade your system to iOS 10.0 or up,before using it.