Cáp nối dài động cơ bước NEMA 17 1m 4 6 pin cho máy in 3D
1 Đánh Giá
Đã Bán 10
157
12.000₫
Mua ngay trên Shopee
Cài đặt Bigbuy360 ExtensionQuốc tế
Cập nhật: thứ hai 31/08/2026 lúc 03:21 CH
LỊCH SỬ GIÁ SẢN PHẨM
Đang tải lịch sử giá...
SO SÁNH GIÁ
MÔ TẢ SẢN PHẨM
Colour:colour
Material:ABS
Helpful Support
Quick Shipping
New stepper motor cable for the most common NEMA 17 steppers found on 3D printers.
size:Length 1M
Length is great for swapping to a Bowden (remote) extruder where your existing cable may not be long enough, or when moving your control board to the outside of an enclosure.
This has the standard JST stepper connector with 4 pins wired on the stepper end, and a 4-pin 2.54mm dupont connector on the controller board end.
Package Contents:1 x Stepper motor link line
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Material:ABS
Helpful Support
Quick Shipping
New stepper motor cable for the most common NEMA 17 steppers found on 3D printers.
size:Length 1M
Length is great for swapping to a Bowden (remote) extruder where your existing cable may not be long enough, or when moving your control board to the outside of an enclosure.
This has the standard JST stepper connector with 4 pins wired on the stepper end, and a 4-pin 2.54mm dupont connector on the controller board end.
Package Contents:1 x Stepper motor link line
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.