Bộ Phụ Kiện Thay Thế Cho Máy In 3d 1.75mm E3D V6
1 Đánh Giá
Đã Bán 1
88
700.000 đ
Xem sản phẩm trên Shopee
Cài đặt Bigbuy360 ExtensionQuốc tế
chủ nhật 11/07/2021 lúc 05:58 SA
MÔ TẢ SẢN PHẨM
Description:
Superior heat break performance, increased structural rigidity.
450°C rated for larger temperature operating range.
Drop in replacement for E3D V6 hotend, such as for PRUSA printer.
The HF version (High Flow Capacity) is the same overall dimensions as the standard one -Painless volcano experience.
Collision will not break your heaterbreaker anymore.
Nozzles can be changed with one hand, without grasping the hot block Nickel plating copper alloy in the hot block will not soften at high temperatures in excess of 500℃.
Specification:
Material: metal
Color: extruder: red
brass nozzle: yellow
wrench: silver
Size(approx): brass nozzle: 1.75mm/0.3mm*2pcs; 1.75mm/0.4mm*2pcs; 1.75mm/0.6mm*2pcs
Type: long range, short range
Maximum extrusion flowrate test result(PLA@215C):
for E3D V6 HOTEND copper heater block: 1020mm/min ≈ 40.01 mm³/second
for Dragon hotend: 1150 mm/min ≈46.08 mm³/second
for Dragon hotend HF: 1560 mm/min ≈62.51 mm³/second
Package:
1 pc x Extruder
6 pcs x Brass nozzle
2 pcs x Wrench
Note:
1. Due to the light and screen difference, the item's color may be slightly different from the pictures.
2. Please allow 1-2 cm differences due to manual measurement.
#Extruder #Set #3D #Printer #Professional #Accessories #Replacement #Tool #Heat #Resistant #Mini #Office #Upgraded
Superior heat break performance, increased structural rigidity.
450°C rated for larger temperature operating range.
Drop in replacement for E3D V6 hotend, such as for PRUSA printer.
The HF version (High Flow Capacity) is the same overall dimensions as the standard one -Painless volcano experience.
Collision will not break your heaterbreaker anymore.
Nozzles can be changed with one hand, without grasping the hot block Nickel plating copper alloy in the hot block will not soften at high temperatures in excess of 500℃.
Specification:
Material: metal
Color: extruder: red
brass nozzle: yellow
wrench: silver
Size(approx): brass nozzle: 1.75mm/0.3mm*2pcs; 1.75mm/0.4mm*2pcs; 1.75mm/0.6mm*2pcs
Type: long range, short range
Maximum extrusion flowrate test result(PLA@215C):
for E3D V6 HOTEND copper heater block: 1020mm/min ≈ 40.01 mm³/second
for Dragon hotend: 1150 mm/min ≈46.08 mm³/second
for Dragon hotend HF: 1560 mm/min ≈62.51 mm³/second
Package:
1 pc x Extruder
6 pcs x Brass nozzle
2 pcs x Wrench
Note:
1. Due to the light and screen difference, the item's color may be slightly different from the pictures.
2. Please allow 1-2 cm differences due to manual measurement.
#Extruder #Set #3D #Printer #Professional #Accessories #Replacement #Tool #Heat #Resistant #Mini #Office #Upgraded
