Bộ phụ kiện đúc ép không gỉ noz V1 cho máy in 3D
2 Đánh Giá
Đã Bán 2
84
148.000 đ
Xem sản phẩm trên Shopee
Cài đặt Bigbuy360 ExtensionQuốc tế
chủ nhật 23/05/2021 lúc 05:40 CH
MÔ TẢ SẢN PHẨM
High temperature & heat ventilation: 12V/40W NTC heater, avoid NTC burn and break frequently, stainless steel material nozzle throat and high quality resistance whose temperature can up to 280 °C, 12V high speed fan, lose heat quickly
Anti-leakage & anti-blocking design: nozzle and tube connect seamless, prevent material leaking and blocking
Easy to install: NTC connector with terminal, you can install directly
Compatibility: Compatible with all 1.75mm V6 3D printer
Color: color as shown
Material: stainless steel + brass
Attention: Small parts, keep away from children
All-Metal V6 Hotend Full Kit with 5 Pcs Extruder Brass Print Head + 2 Pcs Stainless Steel Nozzle Throat for E3D V6 Makerbot 3D Printers
Specification of All Metal V6 Hotend Full kit:
12V/40W heater, the temperature can up to 280°C?Long-term temperature: 240°C/ short-term temperature: 280°C? 12V high speed fan with shroud
One meter long PTFE/teflon tubing 4mm OD 2mm ID
1 X Pneumatic fittings
Type : Extruder Brass Nozzle Print Head
Color: Golden
Material: brass
Input Diameter: 1.75mm
Output Diameter: 0.3mm 0.4mm 0.5mm
Note:
Compatibility:Compatible with all 1.75mm V6 3D printer
package including:
1 x All Metal V6 hotend 12V/40W/1.75mm/0.4mm Nozzle / Extruder
1 x 12V high speed fan with shroud
1 x One meter long PTFE/teflon tubing 4mm OD 2mm ID
1 X Pneumatic fittings
2 x 1.75mm Stainless Steel Nozzles Throat with PTFE Tube
1 x 0.3mm Nozzle Print Head
3 x 0.4mm Nozzle Print Head
1 x 0.5mm Nozzle Print Head
1 x M3 Hex driver.Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Anti-leakage & anti-blocking design: nozzle and tube connect seamless, prevent material leaking and blocking
Easy to install: NTC connector with terminal, you can install directly
Compatibility: Compatible with all 1.75mm V6 3D printer
Color: color as shown
Material: stainless steel + brass
Attention: Small parts, keep away from children
All-Metal V6 Hotend Full Kit with 5 Pcs Extruder Brass Print Head + 2 Pcs Stainless Steel Nozzle Throat for E3D V6 Makerbot 3D Printers
Specification of All Metal V6 Hotend Full kit:
12V/40W heater, the temperature can up to 280°C?Long-term temperature: 240°C/ short-term temperature: 280°C? 12V high speed fan with shroud
One meter long PTFE/teflon tubing 4mm OD 2mm ID
1 X Pneumatic fittings
Type : Extruder Brass Nozzle Print Head
Color: Golden
Material: brass
Input Diameter: 1.75mm
Output Diameter: 0.3mm 0.4mm 0.5mm
Note:
Compatibility:Compatible with all 1.75mm V6 3D printer
package including:
1 x All Metal V6 hotend 12V/40W/1.75mm/0.4mm Nozzle / Extruder
1 x 12V high speed fan with shroud
1 x One meter long PTFE/teflon tubing 4mm OD 2mm ID
1 X Pneumatic fittings
2 x 1.75mm Stainless Steel Nozzles Throat with PTFE Tube
1 x 0.3mm Nozzle Print Head
3 x 0.4mm Nozzle Print Head
1 x 0.5mm Nozzle Print Head
1 x M3 Hex driver.Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
