Bộ Đầu Đùn Hot Ender 3 Ender
1 Đánh Giá
Đã Bán 1
71
123.000 đ
Xem sản phẩm trên Shopee
Cài đặt Bigbuy360 ExtensionQuốc tế
chủ nhật 11/07/2021 lúc 05:44 SA
MÔ TẢ SẢN PHẨM
The use of high-quality friction seat PTFE tube, has good high temperature resistance and lubricity, making printing more accurate
Full metal J-Head V6 back-end kit working temperature range: -40~+260 Celsius (-40~+500 Fahrenheit), voltage is 24V40W, materials are aluminum, stainless steel and brass
Ender 3 with aluminum heating block comes with a spare kit to prevent installation failure; 3 silicone caps and 3 nozzles; white wire is temperature thermistor; braided wire is heating tube
The assembled thermal kit is very easy to install. Connect the heating tube and temperature thermistor to the junction box and pins, and then insert the patch kit
The highest temperature of the high-quality thermistor and heating tube reaches 260 degrees Celsius, with good stability and rapid heating.
The heating block has an insulating silicone sleeve, which can ensure that the temperature of the printer is more stable during operation, and the printing is more uniform and fast for fixed phone els.
The brass nozzle of the printer is smooth inside, which can effectively prevent the print head from leaking. It is an perfect printer replacement nozzle.
Operating temperature range: -40~+260 Celsius (-40~+500 Fahrenheit)
Working voltage: 24V 40W
Colour:Red + Black
Material:Aluminum + stainless steel + brass
Package contents:
1 * Hot end kit
3 * Silicone cover
3 * 0.4mm Printer nozzle
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Full metal J-Head V6 back-end kit working temperature range: -40~+260 Celsius (-40~+500 Fahrenheit), voltage is 24V40W, materials are aluminum, stainless steel and brass
Ender 3 with aluminum heating block comes with a spare kit to prevent installation failure; 3 silicone caps and 3 nozzles; white wire is temperature thermistor; braided wire is heating tube
The assembled thermal kit is very easy to install. Connect the heating tube and temperature thermistor to the junction box and pins, and then insert the patch kit
The highest temperature of the high-quality thermistor and heating tube reaches 260 degrees Celsius, with good stability and rapid heating.
The heating block has an insulating silicone sleeve, which can ensure that the temperature of the printer is more stable during operation, and the printing is more uniform and fast for fixed phone els.
The brass nozzle of the printer is smooth inside, which can effectively prevent the print head from leaking. It is an perfect printer replacement nozzle.
Operating temperature range: -40~+260 Celsius (-40~+500 Fahrenheit)
Working voltage: 24V 40W
Colour:Red + Black
Material:Aluminum + stainless steel + brass
Package contents:
1 * Hot end kit
3 * Silicone cover
3 * 0.4mm Printer nozzle
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
