Bộ Chuyển Đổi Cf '3.5-Inch Ide Card Hỗ Trợ Ddr40-Pin
0 Đánh Giá
4 Đã Bán
44
74.000 đ
Xem sản phẩm trên ShopeeQuốc tế
thứ hai 10/05/2021 lúc 12:58 CH
1. Computer peripheral equipment manufacturers use CF to IDE cards and CF cards to test motherboards, sound cards, image cards and other products. In these occasions, the power supply needs to be turned on/off frequently, and traditional mechanical hard drives are easily damaged. CF card is a kind of electronic hard disk, which is totally different from mechanical hard disk in principle. It is not easy to be damaged in these situations.
2. Portable instruments that use embedded X86 or RISC kernels usually have IDE interfaces. If the CF card cannot be directly connected to these instruments, you can use this adapter to complete the transfer.
3. Personal computers (PCs): These computers are usually X86 kernels, which are the main platforms used by the card. Some digital cameras have a CF card interface interface, you can access your picture data through this card on the desktop.
Compliance with standards: CF specification Ver2.0, IDE/ATA-33 specification; Standard IDE interface interface: true-IDE e; Support CF-I and CF-II two types of cards; The IDE interface is a 40-pin/2.5mm female connector. Insert the card directly into the IDE socket;
Master/slave jumper setting: can be configured as master or slave; Use CF card as DOM: power supply from external floppy drive power socket; Working temperature: 0-60°C, -25C-70°C, -40°C-+85°C
1. CF-50P card to 40 PIN 3.5 inch IDE male hard drive.
2. +3.3V or +5V compact flash voltage selection, power input: +5V
3. Light up and compact flashlight access board LED indicator
4. Used to store embedded Linux, WinCE and other operating systems and applications, data, fully compatible with compact flash memory type I, type II and Mini drives
5. This adapter does not support hot insertion of CF card
el: CF to 3.5 inch IDE
Type: Riser Card
Data transmission speed: 0.01 (MB/s)
Weight: 13 g
size:61x45mm
Material:PCB
colour:green
Package Contents:
1 x 40-pin adapter
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
2. Portable instruments that use embedded X86 or RISC kernels usually have IDE interfaces. If the CF card cannot be directly connected to these instruments, you can use this adapter to complete the transfer.
3. Personal computers (PCs): These computers are usually X86 kernels, which are the main platforms used by the card. Some digital cameras have a CF card interface interface, you can access your picture data through this card on the desktop.
Compliance with standards: CF specification Ver2.0, IDE/ATA-33 specification; Standard IDE interface interface: true-IDE e; Support CF-I and CF-II two types of cards; The IDE interface is a 40-pin/2.5mm female connector. Insert the card directly into the IDE socket;
Master/slave jumper setting: can be configured as master or slave; Use CF card as DOM: power supply from external floppy drive power socket; Working temperature: 0-60°C, -25C-70°C, -40°C-+85°C
1. CF-50P card to 40 PIN 3.5 inch IDE male hard drive.
2. +3.3V or +5V compact flash voltage selection, power input: +5V
3. Light up and compact flashlight access board LED indicator
4. Used to store embedded Linux, WinCE and other operating systems and applications, data, fully compatible with compact flash memory type I, type II and Mini drives
5. This adapter does not support hot insertion of CF card
el: CF to 3.5 inch IDE
Type: Riser Card
Data transmission speed: 0.01 (MB/s)
Weight: 13 g
size:61x45mm
Material:PCB
colour:green
Package Contents:
1 x 40-pin adapter
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.